![background image](http://html1.mh-extra.com/html/keiser/002531bp/002531bp_operation-manual_3983979010.webp)
10
AIR300 LEG PRESS
|
OPERATION MANUAL
SEAT
SEAT
LEG
LEG
Figure 6. Power Display Overview
DISPLAY FEATURES
Resistance, Reps, and Power workout data output on the Power Display are shown below.
OPERATION
How to Adjust the Resistance
• Increase the resistance using the Positive “
+
” Thumb Button.
• Decrease the resistance using the Negative “
-
” Thumb Button.
How to Reset/Clear Workout Data
(Reps, Percent of Peak Power, and Peak Power)
•
Press and hold the Thumb Buttons simultaneously, release when “CLEr” appears in the RESISTANCE window.
•
eChip Users: “CLEr” also deletes the current workout data from the eChip.
System Messages
(appear in the RESISTANCE window)
•
“OFF” = low-power consumption sleep mode.
Sleep mode occurs after 60 seconds of machine inactivity to help prolong battery life. To wake, press either Thumb
Button and resume operation.
•
“Lo-bA” (Low Battery) = weak batteries, replace soon.
If the batteries are dead (depleted), the Power Display remains blank. See page 17 “Battery Replacement” section for
procedure.
RESISTANCE
Current resistance setting
(lbs or kg)
PERCENT OF PEAK POWER
The percentage of peak
power achieved for the most
recent repetition
(0 – 100%)
REPS
Number of repetitions
(0 – 99)
PEAK POWER
Displays the highest power
output (measured in Watts)
that has occurred during your
workout
POWER DISPLAY