keilhauer Syz, Инструкция по сборке, Страница: 3 / 4

Tools Required
Flip the base over.
For two-piece table tops: Place the two zip bolt connectors in the corresponding
depressions in the underside of the table top, and use the allen key to tighten.
Assemble the table top mount clips and corresponding 1/4-20 x 3/4" hex socket screws.
Ensure the threaded inserts on the underside of the table are aligned with the base
extrusions and screw in the table top mount clips loosely, rotating them so that they
clip the top to the lip of the extrusions, then once in place tighten all clips with the
driver gun to secure the top to the base.
For two-piece table tops: Place the table top on the base. If the top is in two pieces
(for models that are 72" round or square; 84" round), fit the dowels into the holes on
one half of the top and push the halves together.
Move the table into place and adjust the glides for a level surface.
x2
(1) Hex Allen Key
7
9
11
8
10
12
x2