Label Applicator Machine Instruction Manual
Page
4
of
8
www.KegLand.com.au
Last Updated 28/09/2020 11:52 AM
2.
Feed the label under the transition roller and up the peeling plate
3.
Feed the label over the peeling plate, behind the first soft pull roller and then between the second soft
pull roller and the knurled pull roller. Then feed the label back underneath the knurled pull roller.
The gap between the second soft pull roller and the knurled pull roller can be opened by
unscrewing the wing nuts underneath the knurled pull roller to make it easier to feed the
paper between two. The wing nuts can then be tightened and the second soft pull roller
rotated to feed the label through these two rolls and underneath the knurled pull roller.
Transition roller
Peeling plate
Peeling plate
Second soft pull roller
Knurled pull roller
First soft pull roller
