Page
4
of
29
http://www.KegLand.com.au
Last Updated 12/01/2021 09:01 AM
Before We Start
Your BrewZilla will enable you to have the freedom in
crafting your own craft beer.
In this instruction ma
nual we’ll teach you the basics
to get you on your way to making your very
own all-grain craft beer.
The BrewZilla was created to help introduce the
public into All Grain Brewing without the headaches
of drilling holes in pots and wiring up boxes. Here we
strive to help you on your journey into the homebrew
world. With a world class customer support base
behind us and a growing community of friendly and
helpful brewers of all
skill levels, we all strive to get each other’s beer to be the best beer you can make.
Firstly, there are some things we need to discuss in terms of safety.
As we will be dealing with electricity, hot liquids, pumps etc. There are some
inherent dangers that need to be considered prior to operating. Always use a sturdy
bench where the BrewZilla cannot fall over. Do not brew in an area with poor
ventilation, high foot traffic area or any area where children can reach the BrewZilla
unit.
Before you start using the brewery check that you have all
the components in these instructions. Please also check
that before you fill the BrewZilla unit that this ball valve on
the side of the unit is turned off and is in the horizontal
position (shown in the picture to the right).
The bottom of the BrewZilla has been lifted and vent holes
multiplied. For this reason you can brew directly on a flat
surface without fear of parts overheating with extended
boils.
