Kegco HK48BSA-L-2, Инструкция по эксплуатации

Страница: 7 / 12

www.kegco.com 7 1-888-980-4810
Troubleshooting
There are many common issues you may experience with your refrigerator that can be solved very easily, without the
need of a service call. Try the tips below to troubleshoot your unit should you experience any problems:
PROBLEM POSSIBLE CAUSE
Refrigerator does not operate Not plugged in or the appliance is turned off
The circuit breaker tripped or a fuse has blown out
Refrigerator is not cold enough Check the temperature control setting
External environment may require a higher setting
The door is opened too often
The door is not closed completely
The door gasket is not sealing properly
Refrigerator is turning on and off frequently The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work Not plugged in.
The circuit breaker tripped or a fuse has blown.
The light bulb has burned out.
The light button is “OFF”.
Vibrations Check to assure that the refrigerator is on a level surface.
The refrigerator seems to make too much noise A faint humming noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused by
the flow of refrigerant in your refrigerator.
Contraction and expansion of the inside walls may cause
popping and crackling noises.
During the defrosting process you may hear a water flowing
sound caused by water flowing into the drain trough.
The refrigerator is not on a level surface.
The door will not close properly The refrigerator is not on a level surface.
The gasket is dirty.
The shelves are out of position.
Smell/odor Check for spills and for food or drink that is out of date or
incorrectly packaged
Outer surface of appliance is wet Condensation has formed and can be wiped dry
External surface is warm Compressor is working to transfer heat from inside the
cabinet