KegMaster
™
Series 4 User Manual
Page 7 of 17
Keg King is a registered business name of MCH Australia Pty Ltd
Door Orientation
The KegMaster
™
Series 4 door is reversible. It can be removed and re-attached to swing from the left or
right, depending on your preference. If you wish to change the door orientation:
1.
If the KegMaster
™
unit is powered on, turn off the power and unplug it.
2.
Prepare a soft towel or blanket to rest the KegMaster
™
on its side.
3.
To get access to the underside of the KegMaster
™
carefully tip it onto the side wall that is
on the opposite side to the door hinge. Rest it on the soft towel or blanket.
4.
Unscrew the
Leveling Foot
(4), which should be on the opposite side to the
Door Hing
Bracket
(5).
5.
Remove the
Door Hinge Bracket
(5) by unscrewing the 2 bolts holding it in place.
6.
Remove the door by carefully sliding it away from the upper hinge.
7.
Remove the
Hinge Pin
(6) from the top corner of the door or unit.
8.
Insert the
Hinge Pin
(6) in the hole in the opposite top corner of the door.
9.
Insert the
Hinge Pin
(and door) into the retaining hole in the opposite top corner of unit.
10.
Fit the
Door Hinge Bracket
to the opposite bottom corner of the door.
11.
With the
Door Hinge Bracket
attached to the door, use the removed bolts to fasten the
Door Hinge Bracket
onto the opposite side of the unit, and tighten firmly.
12.
Attach the
Leveling Foot
(4) where the
Door Hinge Bracket
was previously.
13.
Tip the KegMaster
™
unit back to the upright position.
14.
The KegMaster
™
unit will need to rest upright for 24 hours before power is reapplied.
WARNING
DO NOT power up the refrigeration unit until it has rested upright for 24 hours.
Failure to do so will void the Warranty!
