KEF REFERENCE 209, Руководство по установке

Страница: 22 / 29

41 40
Grille
A dedicated grille assembly is supplied with your
subwoofer. The grille is held on via ‘pegs’ that
locate into the front baffle grille-peg sockets.
However, if you wish, you may remove the grille
by gently pulling it forward toward you.
If required, the grille may be removed during use.
KEF suggest the removal of the grille for serious
listening. However, we strongly recommend
replacing the grill after use.
For cleaning purposes, the grille should
be removed from the cabinets and brushed
lightly with a soft brush. Alternatively, use
a variable suction vacuum cleaner, with soft
brush attachment.
Your Reference Series Model 208 subwoofer is
guaranteed against manufacturing defects in both
materials and workmanship. For further details of
how this guarantee affects you, please read the
enclosed Warranty leaflet.
It should be noted, however, that failure of the
loudspeaker due to abuse, improper or
inappropriate use and/or operation or damage
caused by other faults in your system are NOT
covered within the terms of the guarantee.
Service Information.
It is important to remember that faults arising in
any part of the reproducing system will be heard
via the loudspeakers and therefore when faults
occur, careful and analytical diagnosis will be
required to locate the actual source of trouble.
Faults in a loudspeaker will be audible on all
programme sources. A fault which is evident only
when playing CDs but not, for example, when
using a radio tuner is unlikely to originate with
the loudspeakers.
Service problems should be discussed in the first
instance with the dealer from whom the
loudspeakers were originally purchased.
Generally, warranty claims are best handled by
your dealer.
However, in case of difficulty, please contact:
Customer Services Department.
KEF Audio (UK), Eccleston Road, Tovil,
MAIDSTONE, Kent, ME15 6QP UK.
Telephone No.: +44 (0)1622 672261
Fax No.: +44 (0)1622 750653
www.kef.com
Warranty
Specifications
MODEL 208
Design :
Bass Reflex, magnetically shielded
Drive Unit Array :
300mm (12in.) long-throw LF
Frequency Response :
(± 3dB)
25Hz - 200Hz
Amplifier :
500W built in
Sensitivity :
(2.83V / 1m)
Active system
Maximum Output :
117dB
Low Pass Filter Range :
40Hz to 140Hz (-3dB)
Phase Adjustment Range :
0 to 180 degrees
Impedance :
Active system
Bass Extension :
22Hz (-6dB)
Weight :
40.2kg (88.4lbs)
Dimensions (H x W x D) :
465 x 576 x 579 mm
18.3 x 22.7 x 22.8 in.
Finishes :
Piano Black
High Gloss Cherry
High Gloss American Walnut
Satin Sycamore
Satin Black
Satin Cherry
Satin American Walnut
K7262 REF 209208 Combined Manual_v2 12/2/08 12:40 Page 40