5
2. Directions
2.1 Operation
After adjustment and connection the belt grinding machine is ready for use. The grinding
can take place by the contact wheel or on the surface grinding table by opening the cover
(H) (see
fig.: 1.1
). By loosening the handle (E) the cover (I) can be opened and make
grinding of long materials possible. The lifetime of a new belt is prolonged if the grinding
starts with a light pressure.
2.2 Safety rules for stationary power tools.
Follow them to achieve best results and full benefit from your new machine.
The good craftsman respects
the tools with which he works.
He knows they represent years
of constantly improved design.
He also knows that they are
dangerous if misused.
This is the theme of a new safe-
use program for stationary
power tools. The safety rules
are based on approved
practices in industrial and home
shops
1.
Know your power tool. Read the owner’s manual
carefully. Learn its applications and limitations, as
well as the specific
potential hazards
peculiar to this tool.
2.
Keep guard in place
and in working order.
3.
Ground all tools. If tool is equipped with three-
prong plug, it should be plugged into a three-hole
electrical receptacle. If an adapter is used to
accomodate a two-
prong receptacle, the
adapter wire must be
attached to a known
ground. Never
remove the third
prong.
4.
Remove adjusting keys
and wrenches. Form
habit of checking to see
that keys and adjusting
wrenches is removed
before turning it on.
5.
Cluttered areas and benches invite accidents.
6.
Avoid dangerous
environment. Don’t use
power tools in damp or wet
locations or expose them to
rain. Keep your work area
well lighted.
6.
Keep children away.
All visitors should be
kept in a safe distance
from work area.
