328 080000 01
75
Specifications subject to change without notice.
DISASSEMBLY INSTRUCTIONS OUTDOOR UNIT SIZES 30−36 (CONT)
Steps
9.Remove the motor support
motor support
Twist off the tapping screws securing the motor
support. Pull it upwards and then remove the
motor support.
Twist off the screws connecting the isolation sheet
and end plate of the condenser and chassis.
Next, remove the isolation sheet.
11.Remove the 4-way valv
e
10.Remove the isolation sheet
isolation sheet
4-way valve
Unsolder the pipeline between the compressor
,
condenser, gas and liquid valve, and then
remove the 4-way valve. (
NOTE
: Release all
refrigerant before unsoldering).
Procedure