Keepower XL - pro, Руководство пользователя, Страница: 11 / 16

XL - pro
After charging (Indication on screen )
The “After charging” phase is the phase where the battery is
charged up to app. 100% of the full capacity. The voltage is raised
0.4V compared to the Bulk charging phase.
Testing (Indication on screen )
The “Testing” phase is the phase where the battery is tested for a
defect battery cell.
Maintenance (Indication on screen )
The purpose with “maintenance” phase is to keep the battery at
100% capacity over a long period of time. The charger is always
measuring the voltage and when it goes below 12,6 / 25,2 V it will
start charging the battery.
Boost (Indication on screen )
The “Boost” phase is used to kick-start the battery if it has low
power. This “Boost” is made as an intelligent boosting. This means
that the charger is boosting the battery for ½ hour with maximum
current and then a test is made of the battery to see if it is ready for
normal charging. If the battery is not ready for normal charging, the
charger will boost again. This process is repeated 4 times and if
the battery is not Ok after that the charger will indicate a fault.
While charging the actual voltage, current and the selected battery type is shown
in the display. It is also possible to see how many Ah has been charged to the
battery (not the total Ah on the battery) This is done by pressing the down button.
It is possible to stop the charging by pressing the Back or Select button.
While charging