SETTING UP
6
1.Open the Lid and remove any packaging contents.
2.Place the Towel Warmer on a dry, level, hard surface.
3.Insert Plug into a standard 20V outlet.
1. Button Control
Power Button
- Short press to tum on or off.
Timer Button
- Short press to switch to 15-30-45-60 minutes, the default timing of heating is 15 minutes.
2. Preheating Status Indication
3. After you turn on the power button, and when the temperature is lower than 140°F, the LED indicator will flash;
When the temperature is above 140°F, the LED indicator light will stay red, which means the interior surface is
too hot and unsafe to touch.
4. Heating Time Control
Press the Power Button, the towel warmer will start to heat up. You can control the timing of heat for
15/30/45/60mins pressing the timer button. The default time of heat is 15 minutes. At this mode, the temperature
inside will rise up to 268°F in 7 minutes, and keep at about 200°F-248°F within 15 minutes. After the timer expires,
please turn off the towel warmer.
When the timing mode is at 30/45/60 minutes, after 15-minute heating, the towel warmer will enter into the heat
preservation state and the temperature will be kept at 200°F-248°F until the timer expires.
5. Heating Time Display
When you set up a heating time, the liquid crystal display will show a countdown to the corresponding heating time.
After the timer expires, the heating stops and the time displays 00; After the time shows 00, the LED will be
automatically turned off after 30 minutes to save power;
6. Heating Temperature Display
When you set up a heating time, the liquid crystal display will also show the real-time temperature of the inner
surface in fahrenheit.
7. LED Indication
Timing time indicator
By default, the indicator light is on for 15 minutes after power-on. Press the timer button to switch the time control.
Towel bucket status indicator
Green: powered on
Flashing green light: heating
The red light is on: the inner temperature of the towel bucket > 140°F
the HOT SURFACE INDICATOR turns off.
*After the heating cycle is complete, the INTERIOR SURFACE of the towel warmer will remain dangerous to touch
until the HOT SURFACE INDICATOR turns off.
*These data are experimental data, and the results may be different under different temperatures.
FUNCTION BRIEF
