Keenon Robotics Co.,Ltd
9
3.2 Power On
3.2.1 Switch on/off
The power switch is set on the chassis behind the robot. When the silicone cover under the chassis
is opened, the user can see button on the left, which is the power switch. Find the position of the power
switch in the position exhibited in Figure 3; press the power switch by hand to start the robot. The
system cannot be put into normal operation until it starts for about 40 seconds.
When the power of the robot requires to be turned off, the user should turn off the power switch in
the same manner. After the power switch is turned off, the machine will be powered off at once.
Figure 3 Schematic Diagram of the Position of the Power Switch
3.2.2 Startup of PEANUT APP
1
After the power switch is started, the system desktop will display the LOGO of startup,
animation of PEANUT and Android desktop in sequence and the system will start for
approximately 40 seconds.
2
The PEANUT APP will be automatically opened after the system is started by default. If
the PEANUT APP is not systematically opened, the user should find the PEANUT icon on the
system desktop, as demonstrated in Figure 4, and the APP can be started by clicking this icon.
Figure 4 Icon of PEANUT APP
After PEANUT APP starts, the user can use the PEANUT robot normally.
Note: Open the silicone cover under the
chassis first and press the red button on the
right with your fingers to start the machine.
