Quick Start Guide
Installing Your
Keenetic Hero DSL
AC1300 Dual Band Mesh Wi-Fi Supervectoring VDSL2/ADSL2+
Modem Router with Dual Core CPU, a 5-Port Gigabit Smart
Switch, USB 2.0 and USB 3.0 Ports
Model: KN-2410
10:00
Welcome to
Your Keenetic
Next
3
Сonnect a mobile device to your Keenetic device via Wi-Fi.
The default Wi-Fi name (SSID) and Wi-Fi password are
printed on your Keenetic device’s back label along with a QR
code that will automatically connect your mobile device
to the Keenetic device’s Wi-Fi when scanned. Alternatively,
сonnect a computer to any gray Ethernet port on your
Keenetic device using the included Ethernet cable.
4
Once connected, an Initial Setup Wizard window will appear
on your mobile device / computer. If the Wizard does not
appear, using a browser go to
my.keenetic.net
.
Note:
If the Initial Setup Wizard doesn’t appear, please refer
to the Frequently Asked Questions section below.
5
In the Initial Setup Wizard window select the
configuration option and follow the setup
instructions.
2
Connect your Keenetic device to a power source.
Check that both the Status LED
C
and Wi-Fi LED
D
are illuminated and not blinking.
1
Position your Keenetic Hero DSL (hereinafter ‘Keenetic
device’) within cable lengths of phone and power outlets.
Place your Keenetic device in an open area for better
wireless coverage.
For technical support or other information, please visit
help.keenetic.com
DSL
