History
Version
Description
The ip dhcp host command has been introduced.
2.00
3.24 ip dhcp pool
Description
Access to a group of commands to configure DHCP-pool. If the pool is not
found, the command tries to create it. For a pool one sets a list of DNS-servers
command), default gateway (
command) and the
lease time (
command), as well as a range of dynamic IP-addresses
command).
Having configured the pool, it is necessary to enable the
service using
the
command.
You can enter up to 32 pools. Maximum pool name length is 32 characters.
Note:
In the current version of the system no more than one pool
per interface is supported. For
to function
correctly it is required that the range of IP-addresses set
by
command belong to the network that is configured
on one of the device's Ethernet-interfaces.
Command with no prefix removes the pool.
Prefix no
Yes
Change settings
Yes
Multiple input
Yes
Group entry
(config-dhcp-pool)
Synopsis
(config)>
ip dhcp pool
‹
name
›
(config)>
no ip dhcp pool
‹
name
›
Arguments
Description
Value
Argument
DHCP pool name.
String
name
Example
(config)> ip dhcp pool test_pool
pool "test_pool" has been created.
History
Version
Description
The ip dhcp pool command has been introduced.
2.00
Command Reference Guide — Keenetic Extra (KN-1710)
166
Chapter 3 Command Reference
Содержание EXTRA KN-1710
