4.2
Operation
4.2
THE ALUMINIUM SQUARING ARM
(Optional)
Attach the Squaring Arm
using the two screws and
nuts provided. When
tightening the screws ensure
that the arm is at right
angles to the cutting edge
using a piece of paper or
card cut at 90°, as shown .
To fix the scales in the correct position, place a piece of card on the Squaring Arm and
slide the measuring stop to the back corner then fasten it in position. Cut the card by
depressing the blade and drawing it through the card smoothly. Measure the width of
the card, and stick down the measuring scale so it reads the measured dimension at
the stop.
X
X
