Worktop Material Guide Installation
Manual
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 17 of 17
If not, edge X will show a discrepancy with the cut line that is
FOUR TIMES THE ERROR. Remove the two screws in the plastic
end caps if fitted and rotate the fine adjustment screws to
remove a QUARTER of the discrepancy. Repeat the test and make
further adjustments as necessary, insert the end fixing screws.
