Switch
Left
Tap Mode
Switch
Right
ramp Mode
S
F
Tap
Rate
Edge
Tap tempo
Tap at least 2 times
to set tempo
Blinking rate Indicator
Tap engaged
indicator.
Always
On
1
Turn the pedal on, flip the TAP/RAMP
switch to the left. You will see the blue
light on the slow side light up. In this
mode, the Ramp and Fast knobs do
nothing.
S
F
Tap
Rate
Edge
Tap tempo
Tap at least 2 times
to set tempo
Blinking rate Indicator
Tap engaged
indicator.
Always
On
2
Tap a nice fast beat with your foot.
Then, begin tapping that tempo firmly
on the TAP switch.Make sure you tap
it in an even number of times. If not
the next time you tap the switch will
leave you with a really long phase time.
(fix it by either tapping quickly or just
turning the slow knob to turn tap tempo off)
S
F
Tap
Rate
Edge
Tap tempo
Tap at least 2 times
to set tempo
Blinking rate Indicator
Tap engaged
indicator.
Always
On
3
With the tempo tapped in, the green
light on the fast side stays on. This
tells you tap tempo is engaged.
Moving the Slow knob, will turn
that light and the tap tempo off..
S
F
Tap
Rate
Edge
Tap tempo
Tap at least 2 times
to set tempo
Blinking rate Indicator
Tap engaged
indicator.
Always
On
4
You can use really slow speeds with
the phaser. Try tapping the switch
and waiting about 30 seconds to tap
it again. You might turn the edge up
to make this setting more drastic..
S
F
Ramp
Slow Rate
Edge
Slow/fast
When switching, old light
stays on until ramp is done.
Blinking rate Indicators
Fast Rate
S
F
S
F
Ramp
Selection Indicator
1
Turn the pedal on, flip the TAP/RAMP
switch to the right. You will see the
blue light on either the fast or the slow
side light up. To get things started turn
the Ramp all the way clockwise.
This is the Ramps fastest setting.
S
F
Ramp
Slow Rate
Edge
Slow/fast
When switching, old light
stays on until ramp is done.
Blinking rate Indicators
Fast Rate
S
F
S
F
Ramp
Selection Indicator
2
Put the Slow knob at noon and the fast
knob at three o'clock. Then push the
Slow/Fast switch firmly so that the
blue LED on the fast side is lit up. The
green LED on the fast side should be
blinking fairly quickly.
S
F
Ramp
Slow Rate
Edge
Slow/fast
When switching, old light
stays on until ramp is done.
Blinking rate Indicators
Fast Rate
S
F
S
F
Ramp
Selection Indicator
3
Now let's make the phaser Ramp!
Set the Ramp knob to a little right
of noon. Start playing something
while still in the fast side. Push the
Slow/Fast switch, the blue light
will switch to slow and the phaser
will slow down!
S
F
Ramp
Slow Rate
Edge
Slow/fast
When switching, old light
stays on until ramp is done.
Blinking rate Indicators
Fast Rate
S
F
S
F
Ramp
Selection Indicator
4
Press the switch again to ramp back up.
The further counter-clockwise the switch
is, the slower the ramping will be. It is
not necessary to wait for the ramp to be
done to push the switch again.
Fast as
the ramp
will go!
12 o’clock
3 o’clock
A little past noon
