Charge your TonoCare for a
minimum of 12 hours before
using it for the first time.
Perform a monthly 12 hour
charge of your TonoCare to
ensure optimum battery life.
Refer to the IFU for full
instructions on how to use
your TonoCare.
Navigating the User Menu
• With the unit switched on, press and
hold the menu button to enter the
user menu.
• Scroll through the options using the
print and return buttons.
• Short press the menu button to select
an option and change it using the
print or return buttons.
• Short press the menu button to return
to the user menu.
• Press and hold the menu button to
return to the measurement screen.
On/Standby button
Light
Turn on/off illumination LEDs
Sound
Turn on/off audible alerts
Time
Set the system time
Date
Set the system date
IOP Format
Select the IOP format (XX/XX.X)
Self Test
Brightness
Pachymetry options (OFF/ON/TRIGGER)
(If set to ‘TRIGGER’, the pachymetry option only
appears if the measured IOP value is greater than 15)
Set the brightness for the displays
(value between 1 and 15)
Initiate a self-test
of the system
Menu button
Return button
Manual trigger
OD/OS button
Print button
Pachymetry
Device Controls
User Menu
Description
Bad or invalid
readings
LOW
PITCH
Valid set of
measurements
obtained
Sounds
TonoCare 2.0
Quick Start
HIGH
PITCH
www.keeler.co.uk
www.keelerusa.com
EP59-30881 Issue D
Keeler Tonocare A5 2pp Quick Start Guide EP59-30881 0219 ARTWORK.indd 2
20/02/2019 15:18
