Keeler Pulsair intelliPuff, Инструкция по эксплуатации

Страница: 19 / 32

Next Home Back
19
11. Display examples
The unit will display STBY when power is on.
The unit will display ‘wait’ for one second while the system initialises.
When a pressure (IOP) of greater than 25mmHg is detected, the
unit will display >25, the puff intensity will automatically be
increased from the soft puff to the normal puff level for
subsequent measurements.
The unit will perform regular self tests – if a possible discrepancy
in operating parameters is suspected the ‘run self test’ message
will be displayed for up to 15 seconds. To continue to use the unit
press the OD/OS button to clear the message. The results displayed
thereafter may be suspect. Refer to the
user menu options section
in this manual for guidance on running the self test.
When no fault is found, OK is displayed and the unit
defaults to measure the right eye OD.
Shows first reading of 14mmHg.
The LED OD/OS indicator shows which eye the reading relates to.
If 0.1 significant figure is selected using the menu options.
In this case there is no indication on the display that the
reading is the first or average of more than 1.
Display shows error.
(Signified by a long high pitch sound).