manualshive.com logo in svg

Keebox IPC1000W, Руководство пользователя

Поделиться
Скачать
Keebox IPC1000W Скачать руководство пользователя страница 103

 
 

 

99 

Federal Communication Commission Interference 

Statement 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits 
are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 
communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one of the following measures: 

•

  Reorient or relocate the receiving antenna. 

•

  Increase the separation between the equipment and receiver. 

•

  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

•

  Consult the dealer or an experienced radio/TV technician for help. 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to 
operate this equipment. 

IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. 

 

IMPORTANT NOTE: 

FCC Radiation Exposure Statement: 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and 
operated with minimum distance 20cm between the radiator & your body. 

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 

 

Содержание IPC1000W















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды