b)
)
Peel back rubber end cap and slide 2no. M8 bolts onto the
end of the aluminium extrusion. Replace rubber end cap. Pass
M8 bolts through 62-6 fitting and secure using M8 fixings and
a 13mm spanner. Using a torque wrench tighten to 15N/m.
Repeat process for 3 other legs.
a)
Unpack and check contents. The package should contain
1no. platform, 4no. legs and M8 fixings.
c)
Turn unit over and place over obstacle. Either fix to surface
or sturdy obstacle using appropriate fixing method. Ensure all
fixings are tight with fittings torqued to 29N/m and M8 nuts are
tightened to 15N/m.
Assembling and fixing the Mini Step Over - Fixed Version
b)
Peel back rubber end cap and slide 2no. M8 bolts onto the
end of the aluminium extrusion. Replace rubber end cap. Pass
M8 bolts through 62-6 fitting and secure using M8 fixings and
a 13mm spanner. Using a torque wrench tighten to 15N/m.
Repeat process for 3 other long legs.
c)
Turn unit over and place over obstacle. Either fix to surface
or sturdy obstacle using appropriate fixing method. Ensure all
fixings are tight with fittings torqued to 29N/m and M8 nuts are
tightened to 15N/m.
a)
Unpack and check contents. The package should contain 1no.
platform, 4no. long legs, 4no. short legs, 2no. step platforms, and
M8 fixings. Add 4no. legs to step tread - 2no. short at the front
and 2no. long at the back. Tighten grub screws.
STMFX400* MODULES
STMFX200* MODULES
15
