4.
Important!
Be thorough in placing mineral wool
between the chimney walls and the upper tube. This
ensures that no heat is lost up into the chimney.Place
two thin wooden bars on the bottom of the open fire
-
place. Place the insert on the wooden bars and apply
joint glue to the connection on top of the insert. Slide
the insert into position directly beneath the tube pack.
5. To improve the circulation of hot air through the
fireplace one can open a hole in the hood of the open
fireplace. This is accomplished by drilling a series of
holes with a power drill and removing the bricks.
The hole can then be fitted with a hot air grill. (Acces
-
sory)
6.
Use a crowbar to lift the insert and place the cast
iron feet under the insert, the slightly higher one in the
back and the two others in the front
.
Adjust the posi-
tion of the feet until the insert is level
.
The Fire plate wich is placed on the bottom of the in
-
sert when delivered, is to be placed on the two ledges
near the inside ceiling of the insert.
- 6 -
Wooden bars
Important