Kedacom ZCS-KDCA1, Быстрый старт

Страница: 11 / 20

3
3) Install Main Module
(1
)
Drill holes with a drill (diameter of 8mm) at the cross cursor of letters (A1, A2, A3 and A4) and then strike the
expansion screw tubes into the holes (4pcs in total).
[ Notice ]
The right part o n the main module is for inserting hard disks, so when hanging it, reserve at least
400mm distance from it to the wall or other obstacles.
There are dial switches and tags at the top right corner on the back of the main module and the docks
.
The tags
are indicated below
.
When installing the device, please adjust the dial switches according to the instructions.
For example, before installing the main module, dial both SW1 and Sw2 switches to OFF.
SW1 SW2 Note
OFF OFF Main module (A)
OFF ON Dock (B)
ON OFF Dock (C)
ON ON Dock (D)
2 ) Dial Switch Setting
Alignment reference
line at left edge
Picture 2 Confirm hole positions
A1 A2
A3 A4
430mm
5
1
0
m
m
3
2
0
m
m
95mm
240mm