Kedacom NVR2820-16, Руководство администратора

Страница: 55 / 67

NAT Settings
50
2.4
Camera and NVR Located in Different NAT
2.4.1 NAT Settings
When the Camera or encoder (DVS) and NVR are located in different NAT:
The signaling port (TCP) 5510 of the Camera and NVR must be mapped into port 5510 of the NVR
Set the three packet ports for the NVR to receive videos, audios and video 2 of the Camera mapped
respectively (The values mentioned of the NVR can be seen from NVR or Station.
If the DVS (Camera or encoder) is also located in the NAT, and furthermore in different NAT from the
NVR, port 11992 must also be mapped into the NVR
2.4.2 NVR Settings
enter into the menu: Main Menu Æ Settings Æ Network Æ NAT Parameters,
Set the NAT mapping port of NVR Station and DVS;
Set the mapping ports of the NVR to receive data from video port 12000, audio port 12002 and video2
port 12004 of each Camera in the NAT.
2.4.3 Camera (DVS) Settings
Set the DVS, Change the IP address of the Camera registration platform
：
1
）
Login the IPCCtrl;
2 ） Modify the platform information;
3
）
Select the check box Send NAT Detection Packet ;
4 ） If registered by domain name, fill it in domain option, and fill the DNS IP.