Kedacom NVR1821, Руководство по установке

Страница: 15 / 24

When the NVR1821 starts operating and detects that no disk is installed, the beeper will go
off and an alarm will be generated. To clear the alarm, on the OSD of the NVR, choose
Main
Menu > Alarm > Active Alarm , and then select the alarm and click Clear .
To install a disk:
1. Use a screwdriver to remove the cover of the NVR1821
.
2. Use a screwdriver to uninstall the upper- or lower-layer disk support from the NVR1821.
3. Secure the disk to the disk support with the four included screws.
4. Install the disk support back to the NVR1821.
4