Kedacom IPC2452-HN-SIR, Быстрый старт

Страница: 12 / 16

4
1) When use the device for the first time, run the IPCSearch in the attached CD and set camera IP address and
gateway. If the network provides DHCP service, DHCP server will assign IP for the camera automatically.
3) Click “ Modify Params ” and set the network parameters. When configure a static IP for the camera, please
check “ Custom device address (Close DHCP) ” and fill the Ethernet parameter. During the modification, the
user name (admin) and the password set before activation should be entered. After configuration, the camera
will reboot automatically and this takes 60s.
2) Select the device and click “Batch processing”. In the popup interface, set admin user’s password and the
claim e-mail address to find back the password. Click “Active” and wait for rebooting.
Picture 4
4) Double click the device in IPCSearch or click “ Login ”. Enter user name and password (as Picture 5 shows)
to login the web client.
5) After login, download and install the plug-in.
[Note]: If login the nonactivated camera by web client, you can set admin user’s password on the login
interface to activate the device (as in Picture 6). Before setting, set the PC and the device in the same LAN.