Kedacom IPC2211-HN-SIR, Быстрый старт

Страница: 13 / 20

4
1) When use the device for the first time, run the IPCSearch in the attached CD and set camera IP address and
gateway. If the network provides DHCP service, DHCP server will assign IP for the camera automatically.
2) Select the device and click “Batch processing”. In the popup interface, set admin user’s password and the
claim e-mail address to find back the password. Click “Active” and wait for rebooting.
Picture 3
3. Login client
[Note]:
Some models support PoE (Power on Ethernet). Only have to connect RJ45 connector to PoE switch and no
other power supply is needed.
The tail connector is subject to the actual model. Picture 2 shows the model with most complete connections.
Please refer to the appendix for wire connection.
System for client installation:
Processor: 3.3 GHz CORE®i3 series or other equivalent processors
RAM Memory: 4GB or above
Operating System: Windows XP or newer version
Browser: IE7.0 and newer version, Firefox, Google Chrome (41 and lower)
DirectX
：
9.0c
[Note]: This Guide will take Windows XP as example to explain client login steps.