Intelligent Stud Scanner
Model: KC-098
OVERVIEW
KC-098 Intelligent Stud Scanner can detect joists, AC live wires or metals behind walls
through electronic signals. It mainly applies for wires and pipelines distribution on upholstery,
installation of electrical equipments (air conditioner and oil smoke extractor) and detection for
frame of wood furniture, etc.
KC-098 Intelligent Stud Scanner can be automatically calibrated with sensitive induction after
starting up. Select mode for joists, AC live wires or metal detection through the function selection
switcher. Once the edges of joists, AC live wires or metals are detected, the scanner will send out
acousto-optic indication and you can easily mark the central position of the target on the measured
surface through the marker aperture on top of the tool with pencil.
KC-098 Intelligent Stud Scanner has the function of alarm for AC live wires, when it detects
the AC live wires out, the live wires caution light at the top of the tool will illumine, meanwhile
this will not affect detection for joists or metals, disregard that the function switcher is set in the
mode of joists or metals.
Battery safe prompting
●
Please remove the battery when clean the product.
●
Remove the battery when not in use for an extended period of time.
●
Please install the batteries properly as the instructions of the positive and negative charges
●
Please dispose the batteries properly. High temperature will cause explosions and do not burn
the batteries. Strap insulated tape around the battery charges to avoid unsafe contacts with other
objects. Please follow the local regulations of battery disposing.
TOOLS COMPONENTS
A. Marker aperture---indicates the edge of the detected object.
B. Caution light for live wires (red)---the light is on when detecting electric live wires.
C. Center light (red)--- the light is on when detecting the target object.
D. Arrow light of both sides (orange)---the two arrow lights move towards the center light when
approaching the edge of the detected object.
E. Joists detecting light (green)---the light indicates that the current detecting mode is on joist.
F. AC detecting light (green)---the light indicates that the current detecting mode is on AC live
wire.
G. Metal light (green)---the light indicates that the current detecting mode is on metal object.
H. Power button---the scanner connects to power supply when pressing this button.
I. Mode switcher---set the mode for joists, AC live wires or metal objects.
2