Keces P14, Руководство пользователя

Страница: 12 / 29

Connections
Always disconnect the AC cord to your P14 before making or changing any
input, output or trigger wire connections. Inserting or removing an input or output
cable while the P14 is turned on damage your equipment. Make sure there is no
strain or tension on any cables that could cause them to pull loose.
DC output jacks
The P14 DC jacks size is 2.5/5.5mm
Turn On Options
The setting of the rear panel Turn On Options switch determines how the P14
turns on and off. Setting the Turn On Options switch to Manual or 12 V Trigger
the P14’s front panel Power button. There are two positions for this switch:
Manual:
When the Turn On Options switch is set to Manual the P14 is turned on and off
manually only by pressing the Power button on its front panel every time you
want to listen to music or start up others equipment.
12V Trigger:
When the Turn On Options switch is set to its 12V position, the P14 is turned on
and off only with an ex9 V to +12V DC voltage. When the external
voltage ceases the P14 will turn off within a few seconds. The 12V turn on trigger
circuit in the P14 requires a mere 5mA from the 12V trigger source.