KEC LSMD-104, Информация по установке и инструкции по эксплуатации

Страница: 17 / 43

INSTALLATION FOR VEHICLE USE
16
1. LSMD-104 INSTALLATION
EXAMPLE
Install the unit to metal pillars in the vehicle's roof with 4
screws. If the pillars are not conveniently located, secure a 3/8" ply-
wood board to the pillars and mount the LSMD-104 to the
plywood board.
Use extreme care to insure that tools do not
damage the unit.
Use extreme care to insure that cutting tools
and/or mounting screws do not contact, cut or drill
through exterior body panels.
The DC Power plug should not be accessible to the consumer.
When mounting the LSMD-104 with screws,
be certain that the minimum thickness of the
mounting material is as follows:
Wood : 3/8" or more
Metal : 1/8" or more
Plastic: 3/16" or more
2. LSMD-104 CUTOUT DIMENSIONS
Please use the cutout template that is packaged
with this unit.
NOTES:
DO NOT SECURE THE LSMD-104 DIRECTLY TO THE ROOF HEADLINER MATERIAL. THE
HEADLINER MATERIAL AND BACKING WILL NOT BE STRONG ENOUGH TO SAFELY
SUPPORT THE UNIT'S WEIGHT.
WARNING:
UNDER NO CONDITION SHOULD THE LCD DISPLAY BE MOUNTED IN ANY POSITION
WHERE A PICTURE MIGHT BE VISIBLE TO THE DRIVER. EVEN IN THOSE CASES WHERE
SUCH AN INSTALLATION IS NOT PROHIBITED BY LAW, DONG SO MIGHT INCREASE THE
LIKELIHOOD OF A SERIOUS ACCIDENT