1 1
SIGNAL CONNECTION
•
Prior to making any connections to your LVS SYSTEM, be sure to turn POWER off.
•
For a more detailed understanding of each connection, it is recommended that you read the instruc-
tion manual supplied with each connected cornponent.
•
The following shows one possible example of connections for external equipment.
•
To view connected A/V1
select VIDEO 1 by pressing the TV/VIDEO button on the Remote Control or button on the TV set.
•
To view connected A/V2,3
select VIDEO 2,3 by pressing the TV/VIDEO button on the Remote Control or button on the TV set.
1 0
REMOTE CONTROL USE
CAUTION : Avoid dropping the remote control.
NOTES :
Remote control should be directed at the remote control sensor on the TV.
The maximum operating distance of the remote control is about 10 feet from the front of TV set.
The remote control should be kept away from UV exposure which may disrupt its operation.
It may be difficult to receive remote control signal when UV is present. In this case, operate it closer
to the remote control sensor.
It is time to replace the batteries when the remote control is not working properly.
Replace with new batteries ( Alkaline batteries usually last for 6 months to 1 year. )
Press and push the battery compartment cover in the direction of the arrow and lift off.
Correctly install new batteries, noting the correct (+ / -) polarity shown in the compartment.
Use only new AAA batteries of the same type.
If batteries become exhausted, remove them immediately to avoid leakage.
Should battery leakage occur, clean the battery compartment with a soft cloth and replace with new
b a t t e r i e s .
REMOTE CONTROL BATTERY INSTALLATION
Remote control
Sensor
•
Connect the antenna lead to the
ANTENNA Input terminal of the TV set.
VHF/UHF
ANTENNA
75-ohm
Coaxial Cable
EXT.Speaker
(4 ohm)
VIDEO GAME
or VCP or
DVD etc.
KEC
Mobile
Applications
VCP
<A/V 1 INPUTS>
<A/V 2 INPUTS>
Extension Cable
≒
15 foot
VIDEO GAME or
CAMCORDER,
DVD etc.
<A/V 3 INPUTS>
<A/V OUTS>
