KEC DVD-2, Информация по установке и инструкции по эксплуатации

Страница: 17 / 32

–17–
IMPORTANT NO TE CONCERNING MOBILE BROADCAST TE LEVISION RECEPTION:
WHEN US ED IN A VEHI CLE, TELEVI SI ON BROADCAST RECEP TION WILL BE
ADVERSELY AFFECTED BY CONDITIONS SUCH AS MOTI ON, CHANGE OF DIRECTION,
ATMOSP HERIC ACTIVITY AND LOCAL SURROUNDINGS.
IT IS THEREFORE LIKELY THAT BROA DCAS T PICTURE QUALITY WILL BE MARGINAL
WHEN THIS SYSTEM IS USED IN A MOBILE ENVIRONMENT.
CONNECTIONS – ANTENNA CONNECTION (DVD-2T ONLY)
Connect a TV antenna or CATV cable to t he 75
Ω
ant enna jack on t he back of the DVD-2T. Be sure to
unplug all connections t o t he power source bef ore making any ot her connections.
Setting t he DVD-2T for Ai r or Ca ble Channel Rec eption:
For regular ant enna use, t he TV Mode should be set to “AIR” (Channels 2~69) . For CATV use, t he TV
Mode should be set to “CABLE” (Channels 1~125) .
Procedure:
1. Press the SETUP but ton on the DVD-2T Remote Controller to call up the SETUP
menu.
2. Press the
X
arrow button to select the VIDEO submenu.
3. Press the ENTER but ton t o display the VIDEO submenu.
4. Press the ARROW button twice t o select TV MODE.
5. If the desired mode (AIR or CABLE) is already correct, press the SETUP button t o exit t he menu
screen s.
6. If the desired mode (AIR or CABLE) is not select ed, press the ENTER but ton and t hen press t he /
arrow butt ons t o highlight the desired mode.
7. Press the ENTER but ton and t hen press t he SETUP button to exit t he menu screens.