26
After entering the password, the bar starts to light up in a color combination of two colors. This color
combination must be confirmed on the handheld terminal - this mechanism guarantees a line of sight.
Illustration: Dialog for confirming the color combination of the base station
Then the connection is disconnected and indicated by a dialog, the bar of the base station turns white
and the emergency stop is no longer illuminated.
Illustration: Dialog confirming that the connection has been closed
Illustration: Successful disconnection between base station and handheld terminal
7.7. Error conditions during connection between base station and
handheld terminal
Due to e.g. restart of the handheld terminal or loss of voltage at the base station, an error condition
may occur during the connection. In these cases, an emergency stop is triggered. However, the logical
connection between the two devices remains intact. In these cases, the connection must be released
manually.
The error condition is indicated on the base station by a red running light in the bar
The solution must first be carried out on the base station. The solution takes place on the base station
side by pressing the Pairing Reset button for a long time (>5 seconds). The base station then goes
into the emergency stop state (base station bar is red). In order to leave this state, the emergency stop
must be pressed but not yet unlocked.
