Keba Kemro KeTop T10, Руководство по проектированию устройства

Страница: 58 / 91

15 EC directives and standards
15.1 EC directives
2006/42/EC
Directive for the safety of machinery with the application
MD 2006/42/EC
2004/108/EC EMC directive
2011/65/EC RoHS directive
15.2 Standards
For examination of the conformity of the KeTop regarding the directives the
following legally not bounded european standards has been used:
Examination of the conformity regarding the directive of machinery
EN ISO 13850:2008
Safety of machinery - emergency stop equipment, func-
tional aspects, principles for design
EN 60204-1:2006 chap. 9 and 10
Safety of machinery - Electrical equipment of machines,
general requirements
Examination of the conformity regarding the directive of EMC
EN 61131-2:2007 chap. 8, 9 and 10
Programmable Controllers, Part 2: Equipment require-
ments and test
Other standards
For the design of the safety concept some parts of the following legally not
bounded european standards has been used.
General procedure and safety principles
EN ISO 12100:2010
Safety of machinery - Basic concepts - risk evaluation
and risk abatement
Enabling control device
EN 60204-1:2006
Safety of machinery - Electrical equipment of machines
- Part 1: General requirements
EN ISO 10218-1:2011
Manipulating Industrial Robots - Safety requirements -
Part 1: Robots
EN 60947-5-8:2006
Low-voltage switchgear and controlgear - Part 5-8: Con-
trol circuit devices and switching elements - Three-posi-
tion enabling switches
EN 60947-1:2007
Low-voltage switchgear and controlgear - Part 1: Gen-
eral rules
EN 60947-5-1:2004
Low-voltage switchgear and controlgear - Part 5-1: Con-
trol circuit devices and switching elements - Electrome-
chanical control circuit devices
EC directives and standards KeTop T10
© KEBA 2014
Project engineering manual V1.02 58