Keba Kemro FX 271/A, Руководство по проектированию устройства

Страница: 8 / 26

Target group Knowledge and skills pre-requirement
Project engineer
Basic technical training (University of Applied Science/University level,
engineering degree or corresponding professional experience).
Knowledge in:
●
working mode of a PLC,
●
current valid safety regulations,
●
the application.
Electrician
Specialized training in the electro-technical field (in accordance with
industrial training guidelines).
Knowledge in:
●
current valid safety regulations,
●
wiring guidelines,
●
circuit diagrams,
●
correct installation of electrical connections according to national
and international regulations.
Start-up technician
Basic technical training (Vocational high school, engineering degree or
corresponding professional experience).
Knowledge in:
●
current valid safety regulations,
●
working mode of machine or plant,
●
principal functions of the application,
●
system analysis and troubleshooting,
●
setting options at the operating installations.
Service technician
Basic technical training (Vocational high school, engineering degree or
corresponding professional experience).
Knowledge in:
●
working mode of a PLC,
●
current valid safety regulations,
●
working mode of machine or plant,
●
diagnosis possibilities,
●
systematic error analysis and rectification.
1.4 Notes on this document
This manual is an integral part of the product. It is to be retained over the entire
life cycle of the product and should be forwarded to any subsequent owners
or users of the product.
1.4.1 Content of the document
●
General information on SERCOS III
●
Description of the module FX 271/x
●
Description of the configuration
●
Technical data
Introduction FX 271/A, FX 271/B
© KEBA 2015
Project engineering manual V1.07 8