KEB COMBIVERT F5, Инструкция по эксплуатации, Страница: 6 / 36

GB - 6
Preface
Tests can only be done within the application by the machine manufacturer. They must be
repeated, even if only parts of hardware, software or the unit adjustment are modified.
Unauthorised opening and tampering may lead to bodily injury and property damage and
may entail the loss of warranty rights. Original spare parts and authorized accessories by the
manufacturer serve as security. The use of other parts excludes liability for the consequences
arising out of.
The suspension of liability is especially valid also for operation interruption loss, loss of profit,
data loss or other damages. This is also valid, if we referred first to the possibility of such
damages.
If single regulations should be or become void, invalid or impracticable, the effectivity of all
other regulations or agreements is not affected.
1.4 Copyright
The customer may use the instruction manual as well as further documents or parts from it for
internal purposes. Copyrights are with KEB and remain valid in its entirety. All rights reserved.
KEB®, COMBIVERT®, KEB COMBICONTROL® and COMBIVIS® are registered trade-
marks of Karl E. Brinkmann GmbH.
Other wordmarks or/and logos are trademarks (TM) or registered trademarks (®) of their
respective owners and are listed in the footnote on the first occurrence. When creating our
documents we pay attention with the utmost care to the rights of third parties. Should we have
not marked a trademark or breach a copyright, please inform us in order to have the possibil-
ity of remedy.
1.5 Specified application
The KEB COMBIVERT serves exclusively for stepless open loop / closed-loop speed control
of three-phase a.c. motors.
The operation of other electric consumers is prohibited and can lead to the de-
struction of the unit.
The used semiconductors and components of KEB are developed and dimensioned for the
use in industrial products. If the KEB COMBIVERT is used in machines, which work under
exceptional conditions or if essential functions, life-supporting measures or an extraordinary
safety step must be fulfilled, the necessary reliability and security must be ensured by the
machine builder. The operation of the KEB COMBIVERT outside the indicated limit values of
the technical data leads to the loss of any liability claims.
Units with safety function are limited to a service life of 20 years. The units must be changed
after this time.