KEB C6, Инструкция по эксплуатации

Страница: 45 / 74

45
INSTaLLaTION aND CONNECTION
Figure 34: Connections for the power supply
Please refer to the COMBIVIS connect Control Center online help for all the details
about how to configure and use COMBIVIS connect Router device.
3.11 Connecting the serial port
A special DB15 connector supports all serial protocols (pin assignment see chapter
6.4.1). Therefore it is necessary to adapt the connections to the technical requirements;
KEB can supply connector adapters as optional parts but user can adapt DB15 connec-
tor by himself.For further details please contact KEB.
3.11.1 Connecting to MPI or PPI networks
The electrical specification of the MPI networks are often referring to the use of DB9
connectors like the one shown in the figure below.
Figure 35: DB9 connection adapter
The connector provides also the pass-through DB9 female connector for the MPI cable
of the programming device.
In order to support the use of the standard Profibus / MPI connectors on the market, we
recommend using the adapter cable (available as an accessory) to convert the DB15-M
connector of the COM port to a standard DB9-F, as this is necessary for the connector.