Field Update Process - Method 1
From dashboard click Manage. Use
current login credentials.
This will bring you to the
Management Console
1
Right click the KE2 banner to check
for updates.
Click Start
4
4
5
Click Reboot.
During the update and reboot pro-
cess the LEDs will blink in sequence.
IMPORTANT: Do not power cycle
the KE2 LDA during this process.
5
3
1
2
3
2
IMPORTANT: After a Field Update the credentials will change.
Management: ke2admin
ke2admin
ModBus:
ke2admin
ke2admin
Wireless:
Will remain the same as the label on KE2 LDA with version 1.0
Firmware. On later versions it will maintain the current settings.
Refer to page 16 to change credentials.
Field Updates
Q.5.42 June 2018
Page 19
KE2 Local Area
Dashboard & Alarms
Overview, Installation, and Setup Instructions
© Copyright 2018 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Sync Time
This feature keeps the KE2 LDA in sync for
data logging time stamp. The default setting
is Enable Network Time Sync.
Uncheck the box .
Then, click button to sync time to local PC.
1
1
22
2
