EZ-INSTALL WIZARD
Connectivity
This page helps you connect this KE2-EM Lite
to the Internet. If you want to publish devices
to the Portal for remote access, or receive
alarm notifications, the KE2-EM Lite must be
connected to the Internet.
Connect to the Internet
Ethernet Connection – WAN Port –
Select
this option if you are using a Cat5e Ethernet
cable to connect the KE2-EM Lite to the
Internet. The KE2-EM Lite will automatically
request an IP address from the network.
Stand Alone (No Internet) –
Select this
option if you do not want to connect the KE2-
EM Lite to the Internet.
Wireless Bridge / Uplink –
Select this
option if you want to wirelessly connect to an
available Wi-Fi network within range of the
KE2-EM Lite and use it to access the Internet.
This mode is a convenient way to connect to
another Wi-Fi Access Point, Hotspot, or Guest
Network for quick Internet access. Be sure to
consider any security implications this may
cause. If in doubt, contact your local IT or help
desk for direction and support.
Wireless Bridge / Uplink –
has additional
configuration options:
The KE2-EM Lite has two wireless radios
(2.4GHz and 5GHz) to connect to a pre-
existing Wi-Fi network for Internet access. This
provides the KE2-EM Lite access to the Internet
without running Ethernet cables. Choose only
ONE
, 2.4GHz OR 5GHz, for the Wireless Bridge.
❹