Infrastructure (AP)
Infrastructure mode is used to connect computers with wireless network adapters, also
known as wireless clients, to an existing wired network with the help from wireless router
or access point. Please follow following steps to configure your wireless network.
Step 1, Scanning AP
（
Access Point
）
in your network
Follow the on-screen information and press the
Zoom
button to select
Infrastructure (AP)
mode and update the access points list, and all SSID will be displayed on the screen.
Step 2, Input WEP
/
WPA key.
Press
OK
to input encryption keys via the virtual keyboard,
OK
to confirm and to start
testing the connection.
The testing process will take for a while, please be patient to wait. If the test is ok, the
network information (Profile Name, IP address, Subnet Mask, Gateway, etc.) will be
displayed on the screen.
Peer to Peer (Ad Hoc)
Peer to Peer mode, which is also called Ad Hoc mode or computer-to-computer mode, is
used to connect wireless clients directly together, without the need for a wireless router or
access point.
WPS (AP)
WPS, Wi-Fi Protected Setup, is used to connect a wireless router directly, without
