44
Item
Content
Default value
Description
Sound
Quality
Settings
Clear Voice
On
Set whether to
make listening of
the other person's
voice easier for
calling.
Using airplane mode
In airplane mode, calling function, Wi-Fi
®
and Bluetooth
®
are off at the same time. However you can use the other
applications that require no mobile connection (listening
music, watching video, etc.). Also you can set/cancel Wi-Fi
®
,
Bluetooth
®
individually.
A
→
→
→"airplane mode"
Set to On
◎ When "SIM security" is set to On, switching the airplane mode to
Off from On makes PIN code security valid. Authenticate PIN
code.
Using Wi-Fi
®
By default, your phone's Wi-Fi
®
connectivity is turned on and
always ready to connect to a Wi-Fi
®
network. Your phone will
notify you periodically if there are available Wi-Fi
®
networks
in your area, and you can tap the notification to connect to
the network.
Your phone will automatically connect to networks to which
you have previously connected when you come within range
of those networks.
■ Available channels
Wi-Fi
®
function of IS12T uses frequency band between 1
and 11 channel.
■ Connecting Wi-Fi
®
network
A
→
→
→"Wi-Fi"
Make sure that "Wi-Fi networking" is set to On
Available Wi-Fi
®
networks are detected by this setting. If a
network is found, your phone will list it and note whether it's
an open or secure network.
Select the network you want to connect to
◎ If connection to network is disconnected, re-connect it manually.
◎ To connect to an access point after rebooting, make the network
settings again.
◎ If there is any available Wi-Fi
®
network, you are notified of that at
regular intervals. Tap the notification to connect the network or
stop the notification.
◎ To connect a network with security settings, enter the password
(Security key) and then tap "done". A password (Security key)
is set by the access point. For details, contact a network
administrator.
◎ To disconnect network connection, press and hold the network
you want to disconnect, and then select "delete".
◎ When multiple WEP keys can be registered to an access point,
enter the first registered WEP key. And set the WEP key to use
on the access point.
◎ Tapping "advanced" deletes the connection log.
IS12T̲BasicManual̲.indb 44
IS12T̲BasicManual̲.indb 44
2011/09/02 18:48:18
2011/09/02 18:48:18