KDAR SPG Скачать руководство пользователя страница 12

 

KDAR Company 

15009 Manchester Rd. #283 

Ballwin, MO 63011-4626 

 

Phone: 314-692-8555   Fax: 314-692-8578 

Warranty 

KDAR Company, and its affiliates, warrants that 
the spool gun covered under this warranty is free 
from defects in material and workmanship for two 
years from the date of purchase. This warranty is 
extended to the original purchaser who uses the 
product in a consumer application (personal, resi-
dential or household usage). All welders covered 
under this limited warranty which are used in 
commercial applications (i.e. income producing) 
are warranted to be free from defects in material 
and workmanship for 2 Years from the date of 
original purchase when properly registered. The 
product covered under this warranty is the SPG 
Spool Gun. 
 
KDAR Company, and its affiliates, will repair or 
replace, at KDAR’s sole discretion, parts found to 
be defective in material or workmanship within 
the warranty period. Warranty service will be 
scheduled according to the normal work flow and 
business hours of the service center doing the 
work as well as the availability of replacement 
parts. All decisions from KDAR Company re-
garding this limited warranty shall be final. 
 

Original Purchaser’s Responsibility:

 

 
1.  Retain the original cash register receipt as 

proof of purchase. 

2.  Follow manual instructions regarding the care 

and operation of your welder. 

3.  If warranty work is required, 

DO NOT RE-

TURN THIS WELDER TO THE RE-
TAILER.

 Contact KDAR Company for in-

structions. Visit www.hotmaxtorches.com or 
call KDAR Company M-F 8AM-5PM CST to 
locate the nearest Authorized Service Center. 

Not Covered:

 

 
1.  Transportation charges for sending or deliver-

ing the welder to the Authorized Service Cen-
ter or returning the repaired or replacement 
welder back to the customer. These charges are 
the responsibility of the customer. 

2.  Damages caused by ordinary wear, abuse, rain, 

freeze damage, negligence, accident or failure 
to operate or maintain the welder in accordance 
with the instructions in the operator’s manual 
supplied with the welder. 

3.  Damage caused by unauthorized repair or al-

terations. 

 

Exclusions and Limitations:

 

 

KDAR Company makes no other warranty of 
any kind, express or implied. Implied warran-
ties, including warranties of merchantability 
and of fitness for a particular purpose, are 
hereby disclaimed. The warranty service de-
scribed above is the exclusive remedy under 
this warranty; liability for incidental and conse-
quential damages is excluded to the extent per-
mitted by law. 

 
This warranty gives you specific legal rights, and 
you may have other rights which vary from state to 
state. Some states do not allow a disclaimer of im-
plied warranties, or the exclusion of incidental and 
consequential damages, so the above disclaimers 
and exclusions may not apply to you. 
 

For warranty service or to obtain service parts 
or accessories:

 

 
Call: 314-692-8555 M-F 8-5 PM, CST 
Visit: www.hotmaxtorches.com 
Write: KDAR Company 
 

15009 Manchester Rd #283 

 

Ballwin, MO 63011 

Rev. 1—11/12/2009 

Содержание SPG













Отзывы: