background image

21

WARRANTY

Products are supplied with two(2) years return to base warranty.

From the date of purchase. We will repair or replace the defective item with a new 

or factory rebuilt replacement.

Condition

1.This warranty applies to the original purchaser only.

2. All warranty will be invalid if unauthorized repair or  modification are made to 

the unit or in any case of accident, misuse, damage cause by improper installation  

and altered serial numbers.

3. The liability of is limited to the cost of repair/replacement of the unit under 

warranty.

4. If you need a warranty service, you should send the product to our customer 

service Dep’t or dealer office. The product in all cases must be accompanied by the    

following  items:

Your name, address, telephone number, the serial number, copy of your sales 

receipt showing the purchase date.

The Model Number is on the box and front of the manual. The Serial Number is 

on the bottom of the unit. Record the Model and Serial Numbers in the spaces 

provided below. 

Refer to these numbers for warranty service.

Model No.                                                       Serial No.       

Содержание NAVIEN UHA-742SG/M

























Отзывы: