K-6L
K-6R
H-12
H-12
H-8
Be sure that the Prop
Connector goes below
the Back Rails.
H-6
3
K-41
H-5
Be sure that the Props
are on the inside of the
Back Rails.
4
Be sure that the Prop
Connector
is below the
Back Rails.
Attach the Left and Right
Back Legs (K-6) to the
outside of the Back Rails using
the 3” Cevis Pins (H-12).
Do not put on the Washers
and Hair Pins at this time.
5
Place the Seat Rails (K-2)
onto the 3” Clevis Pins and
secure with Washers (H-6)
and Hair Pins (H-5).
6
Attach the Back Rails (K-41) to the
outside of the Prop Assembly.
Let the Prop Assembly swing down
so that the Prop Connector can go
below the Back Rails.
Please double-check your work at
this time. Any error in this assembly
will cause serious problems later.
K-2
Make sure that the cut-away part of
the Back Legs face in so that they
will support the Back Rails.
K-2
Now put the Washers
and Hair Pins on the
3” Clevis Pins.
H-8
Wheels must
face toward
the inside.
