PARTS
Instructions for
Studio Bifold
Queen #7721
Use a small hammer to tap
Wood Dowels (H-11) all the
way into holes as shown.
1
Manufactured by:
(2) K-62 SEAT SLAT - 76”
(2) K-2 SEAT RAIL - 37”
(7) K-64 MIDDLE SLAT - 72”
K-6L BACK LEG (Left) (1)
K-6R BACK LEG (Right) (1)
K-2 SEAT RAIL (2)
K-65
K-4
H-19
2
(2) K-15 SEAT SLAT CAP - 20”
P A R T S L I S T
BACK RAIL
K-41
2
K-2
2
SEAT RAIL
2
PROP
K-4
K-65
1
PROP CONNECTOR
4
2
6
H-6
6
WASHER
K-64
MIDDLE SLATS
7
20
H-11
WOOD DOWEL
29
H-19
1-1/2” SCREW
2
K-6
BACK LEG (Left and Right)
2
K-7
SEAT LEG
K-62
2
SEAT SLATS
K-15
20” SEAT SLAT CAPS
2
K-61
BACK SLATS
2
(2) K-7 SEAT LEG - 9”
(2) K-61 BACK SLAT - 76”
(1) K-65 PROP CONNECTOR - 60”
K-4 PROP (2)
K-41 BACK RAIL (2)
(2) K-4 PROP - 15”
(2) K-41 BACK RAIL - 34”
Press the Prop Connector (K-65)
onto the Wood Dowels on the
Props (K-4) and attach with
1-1/2” Screws (H-19).
1
K-10
SEAT SLAT SUPPORTS
(1) K-10 SEAT SLAT SUPPORT - 24”
K-4
NOTE:
The Prop Connector (K-65)
shown above is shortened
to save space.
1
K-18
BACK SLAT SUPPORTS
(1) K-18 BACK SLAT SUPPORT - 29”
(2) K-18 BACK SLAT CAP - 25”
K-18
25” BACK SLAT CAPS
2
H-8
2-1/4”
CLEVIS PIN
H-5
HAIR PIN
H-12
3”
CLEVIS PIN
394 Dairy Pak Rd. • Athens, GA 30607
kdframes.com • [email protected]
v. 309
