Knockdown Frameworks, Inc. warrants all of its products for five years against any defects that are due to faulty materials or
workmanship. We will promptly correct such defects by repair or replacement, at our option, without charge. This warranty covers
product defects only and will expire five years after date of purchase by the original consumer purchaser, with proof of purchase
required.
This warranty does not apply to damage caused by and resulting from misuse, neglect, accident, or improper operation,
maintenance, storage, transportation, or handling of the product. This warranty is for the original consumer purchaser for residential
use only and does not apply if the product is used in any commercial application (such as rental property). This warranty does
not cover any incidental or consequential damages. If you feel that you have a claim under this warranty, please contact the store
from which it was purchased. If this is not possible, call 800-543-3393 for advice on handling your claim.
H-1
H-3
L-40
H-8
H-9
11
Attach the Plastic Rollers (H-9) to the
Back Caps with Clevis Pins (H-8).
Attach the Seat to the Back
using the Clevis Pins (H-8).
Secure the Clevis Pins
with the Hair Pins (H-5).
12
H-8
H-8
H-5
L-40
• Attach the Stretchers (L-40) to the Arms using
3” Bolts (H-1) and Cross Dowels (H-3).
Leave all of the bolts loose at this time.
• Carefully put the back in place, making sure that the
rollers go into the slots.
• When all 4 rollers are in the 4 slots,
tighten the bolts.
• Pull forward on the Seat to convert to the bed position.
• Attach the Lounger to the Seat using Clevis Pins (H-8).
• Attact the Lounger Legs (L-14) to the Lounger using Clevis Pins (H-8).
• Secure the Clevis Pins with Washers (H-6) and Hair Pins (H-5).
• Attach the Leg Connector (L-51) using 1 - 1/2” Wood Screws (H-19).
13
H-8
H-8
H-5
H-6
H-19
