Align a Left Footboard Leg (A-15L) and
Right Footboard Leg (A-15R) so that the
rail pockets are on the front.
Turn the Footboard (A-48-F) so that the
pocket holes are facing the front.
Then push the dowels into the holes on the legs.
WOOD SCREWS
GO IN THESE
POCKET HOLES
Use a phillips screw driver to attach
the Legs to the Bed End using
(4) 1 - 1/2” Wood Screws (H-20).
3
RAIL POCKETS MUST
ALL BE ON THE
SAME SIDE
A-15L
A-15R
THESE POCKETS
SHOULD BE TOWARDS
THE TOP
FOOTBOARD ASSEMBLY
Use 2 - 1/2” Bolts (H-21) and
Cross Dowels (H-3) to attach
Bed Rails (A-75-P) to the Bed Ends.
The pockets in the Bed Rails should
be facing in and open to
the top of the Rails.
Leave all bolts loose until everything
is attached. Then tighten all bolts.
H-21
H-3
NOTE:
Place the best looking rail
on the outside to make
your frame look its best.
NOTE:
Rail pockets must
face the inside.
4
