KCT DSP-40 Скачать руководство пользователя

Страница: 4 / 65

DSP-40

WARNING

Thank you for choosing DSP-40. Before installation and use, please read and
understand following instructions for your safety.

Please install the product only after finding a suitable installment place.

Please install on a flat surface.

Please install in place with good ventilation

Do not install in the following place

Sensitive to the vibration

Exposed to direct light

Heavy

moisture

Please do not put heavy materials on the equipment being installed.

Please refer to the manual before using the recorder.

Remember that the power cord may cause electric shock.

Please do not pull the power cord out of the electric outlet.

Please do not take out with wet hands.

The plug should be placed on safe places.

Do not open the recorder.

It is very dangerous to touch the internal parts of the product.

Please contact the accredited shops that sell the product for repairs.

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

Содержание DSP-40


































































Результаты поиска

Содержание DSP-40

Отзывы:

Похожие инструкции для DSP-40

Бренды по названию

Популярные бренды

KCT DSP-40, Руководство пользователя

Результаты поиска

Содержание DSP-40

Отзывы:

Похожие инструкции для DSP-40

Бренды по названию

Популярные бренды