1.
Use auto, manual or direct frequency input to locate the station.
2.
Press the MEMORY button (17) , the LCD indicator will blink.
3.
Press 1-10 within 5 seconds to select the channel. Press the Memory button (17) again to confirm.
Note : You can store up to 10 stations for each band (FM, MW, SW) , When new frequency is selected ,
the old memory will be erased.
Use of Antenna :
1.
AM : The built-in magnetic antenna inside the radio is used. Rotate body to get best reception.
2.
FM : Extend the antenna. Try different angles to get the best reception
3.
SW : Extend the antenna. Make the antenna vertical.
Reset :
If the radio does not operate properly , use a nail to press the reset button. Please note that all the
memory will be erased.
Time setting :
Time1 Setting :
1.
When batteries are is installed, the “12:00” will display.
2.
Press the Clock switch (12) to select Time1 or Time2.
3.
Select Time1 , then press the Time Set (17) button. Within 5 seconds , press the Hr (3) button to set
the hour and MIN (2) button to set the minute. Long press for fast moving.
4.
Press the Time Set (17) button again when you have finished the time setting.
5.
Under the listening mode , power off the radio to display Time1. Press the Clock switch (12) to
display Time2.
Time2 Setting :
1.
Under the clock mode, press the Clock switch (12) to turn to Time2.
2.
Press the Time Set (17) button. Within 5 seconds , press the Hr (3) button to set the hour and MIN
(2) button to set the minute. Long press for fast moving.
3.
Press the Time Set (17) button again when you have finished the time setting.
4.
Under the listening mode , power off the radio to display Time2. Press the Clock switch (12) to
display Time1.
Timer On :
