KC CAM 19.680, Руководство пользователя, Страница: 2 / 9

19.680 – Underwater Camera System - Manual
2
Underwater Camera System – Max. depth 500 m
Camera:
• Resolution: 12 MP
• Field of view (FOV): 145°
• EIS – Electronic Image Stabilization
• Recording time, up to 1 hour and 30 minutes
• Image sensor chip is a SONY IMX 377, 12MP
• Resolutions up to 4K @ 30 frames/second. The default resolution is set to 1080P @ 60 frames/second,
this will give the longest recording time possible
• The internal SD card is a SanDISK Extreme PRO 128 GB Pro
Lights, 2 pcs:
• LED chip, 50 W, each
• Intensity Luminous (lv): 6000 LM
• Viewing angle: 120 -140°
• SubConn connector
Battery and mounting brackets:
• Battery cylinder with SubConn connectors
• Capacity for 90 mins. of recording
• Fully adjustable brackets for lights/camera
Max. depth: 500 m
Item Preparation
1
Charging the camera:
The camera is charged through the USB adapter that
follows the camera; it supports 5-15 V DC power
supply. A DC 5 V 1~2 A charger is recommended, a
standard USB charger for a mobile phone works as
well.
It takes about 2 hours to get fully charged. There is no
indication of fully charged battery and it is
recommended to leave the charger on for a fully 2
hours between each recording.
If the camera has not been used for more than 2
weeks, it is recommended to fully charge the camera
before use.
Low Battery Warning:
When powered on, if the charge is less than 25%, the
green LED will continue to flash for 3 seconds.